If the ping times out Pritunl will trigger a reset on the other available connections with the same gateway and switch the gateway link over to another available gateway. When two users with the same network link connect Pritunl will begin monitoring the connections with a ping. This will instruct the Pritunl server to route 10.50.0.0/24 traffic to the client that will be running on the EdgeRouter. Then add two users both with a network link to 10.50.0.0/24 and start the server. Login to the Pritunl web console and stop any running servers on that are attached to the Organization that you will be using for the EdgeRouter users. Then go to the address you gave the EdgeRouter which is in this example and login to the web console.
Then remove the static IP on your desktop and connect it to the local network. After the address is set, connect the eth0 port of the EdgeRouter to your local networks router or switch. Once the address is set you will no longer be able to access the web console at 192.168.1.1. In this example the local network is 10.50.0.0/24 and the address 10.50.0.20/24 will be used for the first router and 10.50.0.30/24 for the second. Give the interface an IP address that is available on your local network. Once the system settings are configured go the dashboard and choose the Config action of the eth0 interface. A Premium or Enterprise license is required for this configuration. This will not require opening any ports or modifying the firewall on the 10.50.0.1 router.
#PRITUNL ROUTING ISSUES UPDATE#
In the event that either of the gateways fail the Pritunl server will designate another gateway for the traffic and OSPF will automatically update the routing table. Once complete devices on the 10.50.0.0/24 network will have access to the devices on the 10.60.0.0/24 network and the devices on the 10.60.0.0/24 will have access to the devices on the 10.50.0.0/24 network. This example connects both Pritunl gateways to the same internet router it is possible to use two ports on the gateway routers and connect each to a different internet connection to make use of a redundant internet connection. Below is the topology for this example where the local network is 10.50.0.0/24 and the vpn network is 10.60.0.0/24. OSPF will be used to allow backup gateways to be run and to automatically failover routes when a gateway fails.
The gateway will allow the vpn clients to access a remote local network and the local network to also access the vpn clients.
#PRITUNL ROUTING ISSUES HOW TO#
This tutorial will show you how to setup a redundant gateway on your Pritunl server.
0 kommentar(er)
